Factors Affecting the Output of Corn Processing Machines

After purchasing corn processing machines, many customers find that the output of corn products is gradually decreasing during use. So what are the factors that affect the output of corn processing machines?

Generally speaking, there are many factors that affect the output of corn processing machines, such as corn quality, the degree of crushing of raw materials, the capacity of grinding materials, the height of grinding teeth, etc.

Mature corn

1)The quality of corn. During corn processing, mature corn with good quality and full grains is mainly selected. The reason is that the moisture content in mature corn is low, which can produce higher-quality corn deep-processing products. If the moisture content in corn is too high, it will affect the yield during corn processing.

2) The crushing degree of the raw material. The corn processing machiner gives the material pressure by controlling the rolling distance. When the rolling distance decreases, the length of the grinding area increases. At this time, the effect of the fast roller on the material will increase the degree of crushing with the increase of the gear, but the unit flow rate of the corn processing machine will decrease accordingly.

Corn processing machines

3) The capacity of the grinding material. In the previous process, the corn was ground step by step. Because the endosperm was gradually scraped off, so as the number of husk grinding passes is pushed back, the bulk density of the material will decrease, and the flow rate of the corn processing machine will also decrease.

4)The height of the grinding teeth. During the grinding process, the grinding teeth gradually wear out and it becomes more and more difficult to grasp the corn material, so the flow speed of the material will decrease. So the output and the processing efficiency of the corn processing machine will decrease.